Two men, both pioneers and innovators, both pilots, are driving force behind Solar Impulse. Bertrand Piccard, psychiatrist and aeronaut, who made the first non-stop round-the-world balloon flight, is the initiator and chairman. André Borschberg, an engineer and graduate in management science, a fighter pilot and a professional airplane and helicopter pilot, is the CEO. The former’s avant-gardist vision and the latter’s entrepreneurial and managerial experience are an ideal combination.
Mechanical engineers, aeronautical engineers, physicists, specialists in structures and aerodynamics, in design and calculating tools, leading-edge specialists in composite materials, pilots with a passion for renewable energy. From the drawing board to the complicated calculations necessary. All have joined forces to finalise the solar airplane's structure and turn a dream into reality.
The electrical engineers at Solar Impulse have demonstrated their capacity to push all pre-conceived notions to the limit by defying the challenge of solving the delicate balance between maximum efficiency, lightest weight and extreme reliability of the airplane’s photovoltaic cells. To ensure that the energy created is effectively managed, transformed, stockpiled and regulated, the team developed high-performance motors and batteries, all of which are monitored by a central computer permitting energy use optimization during flights.
In this state-of-the-art project there is no room for experimenting. Each concept, each piece of the solar plane has to pass several tests before being certified as "suitable for flight". A small highly-qualified team watches over all these crucial tests. In the different workshops in Dübendorf aerodrome's hangar no. 3, specialists in composite materials and mechanical engineering are assembling the plane and fitting all its component parts.
Defining the plane's configuration, its size, the number of engines, its form – this is all the job of engineers with degrees in aeronautics and mechanical engineering, mathematicians and specialists in the algorithms used in modelling and simulation. They are all multi-disciplinary, with know-how in leading-edge construction techniques, aerodynamics, thermodynamics, project and systems management and computer simulation.
As the HB-SIA, the second plane HB-SIB is going to have to be put through a whole series of trials before setting out on its round the world tour, the project's ultimate highlight. In this test phase, pilots will be joining up with the engineers, taking charge of the ground tests and then the test flights. The engineers' knowledge of performance and flight dynamics will be paired with the talent and skills of the pilots.
The mission team brings together experts responsible for preparing the flights and missions. The flight director, air traffic controllers, mechanical engineers and IT specialists all play a crucial role in the adventure, providing the pilot with data crucial for following his flight plan. Right from the first virtual flight, they have been studying possible scenarios, gathering data and building models, in preparation for day J.
Solar Impulse unites a whole family of international partners sharing the project's pioneering spirit, underwriting its feasibility and committing themselves to promote renewable energy. The partnership team is our interface to them. The public relations team is responsible for liaising with the media all over the world to bring over to the public the challenges involved. The finance department and the secretariat are also indispensable for helping this adventure to take off.
The Ground Crew consists of a group of people passionate about the project, of all ages and horizons. They are available at all times during mission flights to carry out test flights, preparation and execution of the mission. Their role is to ensure proper functioning of the pilot’s equipment, handling of the aircraft on the ground, operational efficiency and safety during take-off and landing as well as performing safety checks after every flight.
Receive bi-monthly news from Solar Impulse: test flights and flights missions, preparation of the First #RTW Solar Flight, and join our community! › Join the community
Solar Impulse Partners have in common a pioneering spirit, a long-term vision and a desire to explore new horizons. › See the partners contributions
As Solar Impulse makes its way to the nation’s capital, the first to last destination of the 2013 Across America mission, it’s a good moment to look back and review the project’s overall media coverage. The press has been extremely welcoming of Solar Impulse and over 7’000 press clippings have been recorded, ...
As Solar Impulse makes its way to the nation’s capital, the first to last destination of the 2013 Across America mission, it’s a good moment to look back and review the project’s overall media coverage. The press has been extremely welcoming of Solar Impulse and over 7’000 press clippings have been recorded, including hits from the Associated Press, Agence France Presse and Reuters (from February 28th until June 4th 2013).
Such a high level of activity was achieved thanks to the incredible effort of Solar Impulse’s Media Relations Manager, Alexandra Gindroz, and Media Relations Coordinator, Alenka Zibetto. They are the driving force behind the media and the ones that ensure journalists are not only at the right place at the right time, but they also feed the press vital information and coordinate interviews with the pilots André and Bertrand in flight and on the ground.
“The project carries a positive message and, although the media generally prefer intrigues and problems, Solar Impulse proves that this project can still inspire and make people dream,” added Alenka. What drives these two young women is in fact the positive aura that surrounds the project. They both agree that it’s the first time in their careers that they’ve had to manage media requests instead of working hard to promote something.
In the United States, the relationship with the media has been very positive and enjoyable with many of them so motivated as to attend flight take-offs at the crack of dawn. Thanks to the support of Weber Shandwick and SJR, Alexandra and Alenka have had invaluable support for the US market, a market that they weren’t familiar with before the 2013 Across America mission.
Despite their efforts to ensure the message is properly reproduced, misinterpretations are inevitable. There have been publications where Solar Impulse has already flown around the world (scheduled for 2015), where Bertrand’s last name was Borschberg and vice versa for André and… where Solar Impulse was mistaken for a U.F.O! During the landing in Phoenix a couple of weeks ago, the police received over 1’000 calls from worried residents. The police rushed to a helicopter and flew to the airport. In touch with the control tower, they inquired about the strange flying object, “A solar plane flying at night?” asked the policemen. Yes indeed, a solar airplane landing at night.
Doesn’t’ that just inspire you? A solar plane flying at night isn’t a dream. And what a perfect subject to lighten up our spirits: squeezed between news about the war in Syria and North Korea’s nuclear program we can also rest assured that Aliens haven’t yet invaded Planet Earth.
Where’s the rest of the Solar Impulse team?
If you’ve been watching Solar Impulse TV during today’s flight, you maybe got a feel for the size of the team. Ground Crew and Logistics teams are in the US, ensuring that flights are carried out smoothly from takeoff to landing. The Marketing & Communications team and the Mission Control Center folks (who include ...
If you’ve been watching Solar Impulse TV during today’s flight, you maybe got a feel for the size of the team. Ground Crew and Logistics teams are in the US, ensuring that flights are carried out smoothly from takeoff to landing. The Marketing & Communications team and the Mission Control Center folks (who include meteorologists, Air Traffic Controllers and the Flight Director) are all in Payerne (Switzerland) guiding the pilot in the air with all sorts of programs and satellite connection devices. And there’s the multimedia team, split between two continents, Old and New, keeping us entertained and connected as the sleek silhouette of HB-SIA glides through the North American skies. But where are the engineers?
We’ve hidden them in a quiet place, where the skies are always grey and common distractions are scarce… in the suburbs of Zurich. We have to make sure they don’t escape, right? Jokes aside, the men and women that together have contributed to build HB-SIA are all extremely busy making a new airplane: Solar Impulse’s second generation solar-powered aircraft, HB-SIB. Indeed, if you thought the adventure was going to end with a graceful landing at New York’s JFK airport this summer, you were mistaken. The adventure will continue with the flight around the world scheduled for 2015.
The design phase of HB-SIB’s construction is complete and the Solar Impulse engineers are now busy testing parts in preparation for the assembly, scheduled for the end of 2013. Just a couple of weeks ago there was the Iron Bird – designed to test the electric wiring and overall electronics in a mock cockpit. Everything was setup as if it were the “real thing” with the hundreds of wires pulled through the full structure of the cockpit. Each part is initially tested separately, but in a complex electric system with different machines and a number of variables in play it is important to verify how everything interacts. The tests were successful. The four motors were running at 300 rpm at the same time as the other systems, such as the driver, the batteries and the balancers. A few other tests are still scheduled and, once everything is given a green light, it will be transposed as is to HB-SIB’s cockpit.
If you want to more about the Making Of HB-SIB, click here.
Discussing to perfection
Just like the eternal to and fro between civil engineers and architects to find the best balance between design and a physically viable structure, a constant discourse goes on between the Design and Structural Analysis teams at Solar Impulse. The difference is that they’re all engineers, so no need to fix wacky structures ...
Just like the eternal to and fro between civil engineers and architects to find the best balance between design and a physically viable structure, a constant discourse goes on between the Design and Structural Analysis teams at Solar Impulse. The difference is that they’re all engineers, so no need to fix wacky structures that can only exist in cartoons.
Everything that’s designed has a purpose but every part needs to fit in the greater scheme of things while also abiding to the strict lightweight guidelines. Led by Geri Piller, the Structural Analysis team consists of 4 engineers. The Design team has the concept, but it’s up to Geri’s team to decide which and how many materials to use for a given part in relation to the load that it must carry.
Geri once gave me a 101 Structural Analysis course (I would have certainly done better at reading a Chinese newspaper though), but I did manage to retain something: every material reacts differently to loads (for example, steel reacts to stress differently than carbon) and this is crucial when building a part.
For reasons of weight, the majority of HB-SIB’s structure is made out of carbon, a very peculiar material. Carbon is extremely resistant in the direction of its fibers, but extremely frail in the other. The Structural Analysis team has to decide in which direction the fibers must be placed, how thick each layer has to be and how many plies are needed. This results in complex manipulations with a specialized software (FEA finite element analysis) where the structural engineers manually input the characteristics they want and subsequently observe how the part reacts to the expected loads applied to it.
It’s not a linear process (it takes two to tango). It’s a constant back and forth between structural and design engineers, an ongoing discussion to reach perfection because, once the design and structure make the perfect match, the part is finally sent to the producer; a joint effort that gives birth to a new part. Because of the unique nature of this aircraft, every part is literally handmade. Consequently, some information can be lost in translation when transforming the software design into a manufactured part. That’s why every part needs to be tested thereafter; a crucial process Geri and his team actively engage in. Stay tuned for information about the Testing team coming soon on our blog!
In the photos: from left to right: Björn Müller, Stefan Pfammatter, Geri Piller and Dominik Dusek (adjacent), Geri Piller (bottom), FEA (top).
Follow the series here: "THE MAKING OF A SOLAR AIRPLANE"
Keeping the puzzle together
Before building anything there needs to be a concept and a design. Like when you build a house: you think about its location, its size, its architectural design and, most importantly, the thickness of your wallet. You obviously can’t start with the roof without a foundation and you certainly can’t install the bathroom without first connecting the drain pipe to the grid.
Once the parts are designed, who puts the puzzle together in a timely and coherent manner? Someone has to see the big picture, juggling deadlines, budget and production. At Solar Impulse, that role is attributed to Robert Fraefel, Head of Airplane Development.
Röbi, as the team likes to call him, is the man behind the scenes, the choreographer of it all. He motivates the engineers, encourages them when obstacles arise and stimulates them to pick up the pace when a deadline is approaching. He’s also somewhat of a public relations figure, meeting with dozens of suppliers and producers to seek their collaboration and ensure their deliveries meet the strict quality requirements.
An engineer with a Formula 1 background, Röbi immediately found himself in his element working for a project that pushes the boundaries; but the parallel ends there. At Solar Impulse it’s hard to plan because “we don’t know how long it takes to develop a part until it’s ready for production”. At Formula 1 “you already know, more or less, how many parts you need, how they will look like”; you always have a starting block as opposed to Solar Impulse.
When I think about the number of factors and variables involved in the construction of such a unique aircraft, I can’t help but wonder how Röbi’s hair hasn’t turned grey yet. Between the engineers in Dübendorf and Payerne, he has to regularly commute between the French and German-speaking regions of Switzerland to ensure everything is evolving smoothly.
“You have to start with something even without knowing the whole story and just go step by step.” Revealed Röbi during one of our conversations, “we tend to want to know everything from the beginning, but we have to just take the first step, advance a little and then go forward to the next keeping the target in your head.” That’s Solar Impulse’s philosophy: step-by-step and we eventually get there.
Just as when André and Bertrand were already thinking of flying a solar aircraft without even having the hardware, Röbi started working on the project 7 years ago not knowing if it would actually be able to fly; but step by step…
Follow the series here: "MAKING OF A SOLAR AIRPLANE"
How do you design a solar airplane?
“If you have to give something a shape, you first have to think of the space you have to build it in.”
This is the starting block of Solar Impulse’s design team. It’s just like when you move into a new home; you look at the house plan, imagine the space you have available and decide which piece ...
“If you have to give something a shape, you first have to think of the space you have to build it in.”
This is the starting block of Solar Impulse’s design team. It’s just like when you move into a new home; you look at the house plan, imagine the space you have available and decide which piece of furniture fits where, seeking the most practical but also most esthetic setting. Jonas Schär, and his team of designers do pretty much that: a sort of “interior design” of the airplane’s silhouette – and the silhouette, as we have seen in the first article of this series, is given by the concept.
Led by Jonas Schär, Solar Impulse’s Design team consists of seven people who are responsible for defining every minute detail of the aircraft. The guiding maxim is that the aircraft should be able to fly hence, every component must be carefully studied, first separately and then as a whole, religiously abiding to the maxim. Consequently, this means that everything must be designed to be as light as physically possible.
I like to think of the designers as the magical funambulists because they have absolutely no margin for error in “furnishing” the aircraft silhouette’s “empty” space. Every component has to fit into the overall restrictive weight requirements while also fulfilling its own proper function as efficiently as possible.
Each member of this team is assigned a component of the aircraft which they bring to life via 3D engineering software. Believe me, although I’m not an engineer myself, seeing the virtual 3D drawing of an airplane’s part spinning at all angles on the computer screen is simply cool. Unfortunately, every time they show me a new component, I inevitably unveil my ignorance and ask “where does this part belong”? It seems my passion for Legos as a child did not provide me with the necessary skills to meet the particular requirements for this seemingly unsolvable puzzle.
If designing HB-SIA was unbelievably difficult because of it being the first aircraft of its kind, the challenge is even greater for HB-SIB. Why you ask? Optimizing an already good system is a brain-teaser in of itself requiring a good degree of skill, physics, common sense and good “interior designer” intuition. What a cocktail!
But jokes aside, HB-SIB might look like HB-SIA; but the similarities end there. HB-SIB will not only be 11% larger, but many other features have evolved starting from the wingspan, the motors, the pilot’s equipment and the size of the cockpit.
Asking Jonas how he felt when he was told he would be building the solar airplane of its kind: “I didn’t fully realize it back then. I was maybe young enough to just proceed forward and come-up with ideas to make things happen. But I was never alone, and it’s still the case.” He isn’t in fact alone, aside from the necessary information exchange between teams; the aircraft’s design is a team result of (in the photo, from left to right starting from back): Pascal Barmet, Frederick Tischhauser, Michael McGrath, Jonas Schär, Oliver Ensslin, Simon Bodmer, Lukas Staub and Martin Meyer.
Follow the series here: "MAKING OF A SOLAR AIRPLANE"